![background image](http://html.mh-extra.com/html/bushranger/bru36v9601/bru36v9601_operators-manual_2835600016.webp)
16
Replacing The Cutting Blade
WARNING
Always protect your hands by wearing heavy gloves and/or wrapping the cutting edges with rags or other materials when
performing any maintenance on the blades. ALWAYS remove the battery when servicing or transporting the mower.
NOTE:
Only use authorized Bushranger
®
replacement parts.
Remove Battery
• While wearing leather padded gloves, wedge a block of wood between the blade and the mower deck in order to
prevent the blade from turning w hen the nut (1) is being removed.
• Using an adjustable wrench or 15 mm socket, loosen the nut (1) and remove the washer (2) and blade (3). Turn the nut
“COUNTERCLOCK WISE” to loosen it and “CLOCKWISE” to tighten it.
• Remove the nut (1), the washer (2) and the blade (3).
• To re-install the blade, position the blade with the cutting edges toward the ground. Assemble the nut as shown. Using a
15mm socket or wrench, turn the blade nut “CLOCKWISE” in order to secure the blade. Torque to 40-45 N.M.
NOTE:
Be sure to replace the parts in the exact order in which they were removed. When installing the cutting blade, verify
that it is installed with the curved ends pointing toward the mower deck, and not toward the ground.
Cleaning The Mower
WARNING
In order to reduce the risk of electric shock, do not expose the mower to water. The underside of the mower deck should be
cleaned after each use, because grass clippings, leaves, dirt, and other debris will accumulate, which will cause rust and
corrosion.
• Remove any build-up of grass and leaves on or around the motor cover
(do not use water)
. Occasionally wipe the
mower clean with a dry cloth. If debris builds up on the underside of the mower during use, stop the motor, disconnect it
from the battery, and then tilt the mower on its side, and scrape it clean using an appropriate tool.
Service and Adjustments
• Identical replacement parts that are available from the manufacturer. When ordering replacement parts, remember
the use of parts that do not meet the original equipment specifications may lead to improper performance, and may
compromise safety and warranty.
• Before cleaning, repairing, or inspecting, verify that the blade and all moving parts have come to a complete stop.
CARE AND MAINTENANCE
1
2
19
CARE AND MAINTENANCE
REPLACING THE CUTTING BLADE
WARNING
Always protect your hands by wearing heavy gloves and/or wrapping the cutting
edges with rags or other materials when performing any maintenance on the
blades. ALWAYS remove the battery when servicing or transporting the mower.
REMOVE BATTERY
While wearing leather padded glov es, wedge a block of wood between the blade and the mower
deck in order to prevent the blade from turning w hen the bolt (1) is being removed.
• Using an adjustable wrench or 27 mm socket, loosen the bolt (1) and remove the blade (2). Turn
the bolt “COUNTERCLOCK WISE” to loosen it and “CLOCKWISE” to tighten it.
• Remove the bolt (1) and the blade (2).
• To re-install the blade, position the blade with the cutting edges toward the ground. Assemble
the bolt as shown. Using a 27 mm socket or wrench, turn the blade nut “CLOCKWISE” in order
to secure the blade.
NOTE: Be sure to replace the parts in the exact order in which they were removed. When installing
the cutting blade, verify that it is installed with the curved ends pointing toward the mower deck, and
not toward the ground.
2
3