![background image](http://html.mh-extra.com/html/bushranger/b2301/b2301_operators-manual_2835615012.webp)
HANDLE ASS'Y
INSTALLING HANDLE (Refer Fig. 1)
Handle comes in two parts, plus four screws. Fit bottom half to
shaft and place top half on top. Align the four screws and tighten.
Position handle in a
operating position and
tighten four M5X40 screws.
10
Fig. 1
INSTALLING PLASTIC SHIELD (Refer Fig. 2)
Install the
cover on the
with
the
cover bracket and the screws
provided.
Tighten the screws
setting the
cover bracket at the appropriate position.
GEAR CASE
SCREWS
M5x16
Fig. 2
The two outer screws will secure the guard to
the bracket, while the centre screw will locate
the correct position for the guard/bracket.
Summary of Contents for B2301
