![background image](http://html.mh-extra.com/html/bushranger/530spb/530spb_owners-manual_2835594009.webp)
OPERATING THE LAWNMOWER.
CAUTION
Always wait until the engine has
stopped and the blade has stopped rotating
before fitting or removing the Mulcher plug.
Handlebar folding instructions:
The handlebar assembly is supplied in the storage
position for packaging purposes. The folding handle
system allows for compact storage when not in use.
Unfold the handle by lifting and turning it to its
‘mowing’ position.
Lock the handlebar in this position before operating
the mower by activating the locking lever. The
locking lever can be locking in place at any point
throughout its 360-degree movement.
On models fitted with ‘zone start’ facility, pull the
engine starter cord out carefully so that there is
sufficient length to extend the handle fully without
stretching the cord.
To change the handlebars back to the storage position,
simply loosen the handle locking lever and rotate the
upper handlebar forward over the mower body.
Handlebar Height adjustment instructions:
The height of the handlebar can be adjusted to various
heights.
Lift the grass flap and secure it in the open position, loosen the four bolts two on each side
holding the handle to the mower.
The handle can now be adjusted to the correct height by moving it.
Hold the handle in place and tighten the bolts to secure the handle in its new position.
To adjust the handle height on the 530 self propelled models, you must first remove the
cover to the gearbox area.
Mulch & Catch models:
The mulching lawnmowers have been
assembled ready for mulching mode. They
have the mulching plug inserted and the
correct blade system fitted. Removal of the
mulcher plug and fitting the catcher converts
the mower to a catching model and vice
versa.
NOTE: The 530SPB has no mulch option
5
Summary of Contents for 530SPB
Page 1: ......
Page 24: ...TROUBLESHOOTING ...