16
4.1.5 Setting Date and Time
You can change the date and time of the device by setting this parameter
when necessary, e.g., after every battery change. It must be pointed out
that the function of some keys is not the same as previous, such as UP/
DOWN key is used for changing the value of date/ time and RIGHT/LEFT
key is used for jumping to the next setting menu. The format of the date
is month/day/year while the time format is hour:minute:second. And the
valid value for year is between 2006 and 2031. Provided that the date and
time are needed to be set to November the fifteenth 2007 and half past
ten, in MENU state the steps are as follows:
a)
Push the UP or DOWN key until the parameter “Set Clock”
appears, shown in the Fig. 9(a) and 9(1).
b) Push the OK key to start to set the month. Then the current date
and time will be shown with the first item month highlighted,
shown in the Fig. 9(b) and 9(2).
c)
No change is required to set the month because the current
showing month is the same as the desired setting month 11.
So directly push the RIGHT key to enter into the day setting as
shown in the Fig. 9(c) and 9(3).
d) Press the UP or DOWN key until the day changes to 15 as shown
in the Fig. 9(d) and 9(4).
e)
Press the RIGHT key to enter into the year setting as shown in the
Fig. 9(e) and 9(5).
f)
Press the UP or DOWN key until the year changes to 2007 as
shown in the Fig. 9(f) and 9(6).
g) Press the RIGHT key to enter into the hour setting as shown in
the Fig. 9(g) and 9(7).
h) Press the UP or DOWN key until the hour changes to 10 as shown
in the Fig. 9(h) and 9(8).
i)
Press the RIGHT key to enter into the minute setting as shown in
the Fig. 9(i) and 9(9).
j)
Press the UP or DOWN key until the minute changes to 30 as
shown in the Fig. 9(j) and 9(10).
k)
Press the RIGHT key to enter into the second setting as shown in
the Fig. 9(k) and 9(11).
Trophy 119415 Trail Cams-1LIM-rev2.indd 16
3/11/2009 9:42:10 AM
