Bushnell Trailscout 119700, User Manual

Page: 12 / 22

12
2. K2 – Image Mode Switch (STILL / MOVIE):
Set K2 to either of these settings:
(UP) STILL Photo Mode : Image resolution is 2.1MP (119700/119830), or 3.0MP
(119930/119901) and photos are stored in JPG format.
(DOWN) MOVIE Mode:
The camera can record a 15 second movie, the file format is AVI.
NOTE: The use of MOVIE Mode must be during daytime with models 119700/119830 . You can
not record movies at night. However, MOVIE mode with the models 119930/119901 CAN be used
at night when the camera is in the IR-LED mode.
(Models 119930/119901 only)
3. K3 - Lighting Mode Switch (LED / Incand):
The Game camera has two modes for illumination in darkness:
(a) LED Mode (Infrared LED lamp array):
When you use IR-LED light mode to take still picture at night, you must slide the FILTER
SWITCH to the NIGHT (moon icon) position-this removes the internal infrared blocking filter.
The IR-LED (infrared) light is invisible to the naked eye, but will provide illumination for the
camera, use it when you do not want to alert the subject. This mode can also be used for night
time movie capture. If you want to use the camera in 24-hour mode with IR-LED light at night,
you may keep the filter switch in the NIGHT position-however, your daytime photos will have a
black & white appearance as infrared energy is not being blocked by the filter inside the lens.
(b) Incand Mode: (Normal flash tube)
You can use Incandescent mode to take full color still pictures at night. Keep the FILTER
SWITCH in the DAY (sun icon) position for best results and normal color.
If you want to record movies using the MOVIE mode, you can not use Incand mode—you must
set K3 to LED Mode.
Setup Guide (cont.)