18
Q: ARE THE DATE AND TIME SET AUTOMATICALLY BY THE CELLULAR NETWORK?
A: No, the date and time must be manually set.
Q: CAN I USE THIS WIRELESS CAMERA ON A NETWORK OTHER THAN AT&T OR VERIZON?
A: No, Impulse camera models are only available for those networks, and cannot be changed by the user to operate on a different network.
Q: DO I NEED THE SMARTPHONE APP TO MAKE THE CAMERA WORK?
A: No, the smartphone apps are a free additional resource. If you choose to not download those, you can still manage the camera remotely and view
images from the user website
Q: WHAT IMPULSE CAMERA SETTINGS WILL I BE ABLE TO REMOTELY CHANGE?
A: You can change the following settings remotely;
• Image Type
• Set Time/Date
• PIR Mode
• Send Image frequency (immediate or once daily)
• Embed GPS on/off
• PIR Sensitivity
• Overwrite on/off
• Camera Name
• Image MP (photo resolution)
• Num Pics
• Delay
• LED (IR flash output level)
• Shutter speed
• Timestamp on/off
• Pic Format
• Fieldscan on/off
• Vid (video resolution)
• Vid Length
• Hybrid on/off
Remember to click “Save” after making changes to any settings. Otherwise, the changes will be lost and the camera continues to operate based on the
previously stored setting.
Q: WHY DOES THE CAMERA SHOW MY LOCATION IN KANSAS?
A: As with most GPS products, the default location is the manufacturer or point of origin (Bushnell main offices). The camera will update its current actual
location when you send the test image, and again at each daily check in.
Q: I MOVED MY CAMERA AND THE IMAGES ARE NOT IN THE CORRECT ORDER, WHY IS THAT?
A: If you move your camera to a different time zone your pictures will be stamped with the date and time of the new time zone.
Q: CAN I USE MY CAMERA WITHOUT A DATA PACKAGE INSTALLED?
A: Yes, the camera can operate without a data plan. You would not be able to send images from the camera or change settings remotely however, only
use it as you would a conventional, non-wireless trail camera.
Q: HOW DO I SET MY CAMERA TO FIELD SCAN FOR A PERIOD THAT SPANS PAST MIDNIGHT?
A: To accomplish that, you need to set Field Scan A and B Start/Stop times like this example: 12am-7am (“A” time block starts after midnight) and 7:01am-
11:59pm (“B” time block stops before midnight). The Field-Scan is a range of hours in a single day.
Q: WHY DO I SEE SKIPPED IMAGES ON WEBSITE OR APP?
A: Field Scan Images will not be transmitted to the website or app.
Q: WHY DO I SEE SKIPPED IMAGES ON WEBSITE OR APP OVERNIGHT?
A: The camera does a nightly check in every night, while doing so it may utilize field scan to trigger the camera in which case it will not transmit those
images but may store them to the SD card.
Q: HOW DO I COMPLETELY DELETE A CAMERA FROM MY ACCOUNT?
A: You must first go into settings and select “remove from account”. Next you must go in and delete all images. Once all images are deleted the camera
will no longer appear on your account grayed out.
Q: HOW DO I TURN OFF ALERTS TO MY PHONE, EMAIL OR APP?
A: You can accomplish this via the account settings page on the website or on the app.
Q: WHAT IF I LOSE WIRELESS SIGNAL ON THE CAMERA—WILL IT CONTINUE TO TAKE IMAGES?
A: If you lose connectivity to the network, the camera will continue to take images like a normal trail cam and save them to the SD card.
