8
ZEROING YOUR FIRST STRIKE REFLEX SIGHT
Note: the following should be done at an approved
range or other safe area. Eye and ear protection is
recommended.
The First Strike scope has an integrated photocell
(pg.
4, A), which automatically activates the unit when the
protective lens cover (H) is removed, so there is no power
switch. When you are finished using the scope, simply
replace the cover to turn the power off again. Brightness
of the 5 moa red dot is also automatically regulated by
the photocell, based on the level of ambient light.
1. With the scope mounted and with the protective
lens cover (H) removed, rest the gun on a solid
support.
2. Start by sighting along the barrel and aim at a
target 25 to 50 yards away. View through your
electronic sight and gently rotate the windage (F)
Distance 1 Full Revolution of Adjustment Screw
25 yds
12.5 inches
50 yds
25 inches
100 yds
50 inches
Distance 1 Hash Mark of Adjustment Screw
25 yds
1.5 inches
50 yds
3 inches
100 yds
6 inches
Point of Impact Change Chart
