background image

FCC Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not occur in a particular 

installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or  television  reception,  which 

can be determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

• Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cable must be used with the equipment in order to comply with the limits for a digital 

device pursuant to Subpart B of Part 15 of FCC Rules.

Specifications  and  designs  are  subject  to  change  without  any  notice  or  obligation  on  the  part  of  

the manufacturer.

10

Summary of Contents for Cabela 20-3031













Reviews: