Using The Main Menu and Setup Submenu
As mentioned earlier in this manual, your ImageView is already set for high resolution and quality right out of the
box. Exposure, white balance, and other variables are set automatically. This means that you will get good results for
most subjects and lighting without the need to go into the menus and change any settings. However, we recommend
that you become familiar with the available options so that you can improve your photos if, for example, you decide
they are coming out too dark (common for snow scenes with most cameras), or too green (under many fluorescent
lights). Press the “Menu” button to enter the main menu. Use down or up arrow buttons to highlight an option
within the menu, then press Menu if you wish to change the settings for that option. Use the Left/Right arrow to
select the setting you want, then press Menu to confirm this setting. The main, or camera, menu also contains a
submenu, called “Setup”, which contains the items you are most likely to need to set just once. Here are the options
and settings available in the main menu and its Setup submenu.
MENU
Option
Settings
Description
MAIN
EV
-2.0 ~ +2.0 (Default= 0
EV)
Provides manual under/over exposure adjustment
in 0.5 EV steps. Minus values produce darker
photos, plus values lighter.
Resolution
VH,
H
, M, L
Sets the desired still photo resolution in pixels.
Very High (2272x1760), High (2048x1536),
Medium (1280x1024), Low (640x480). Higher
resolution settings produce sharper/larger prints
but require more storage space in internal or
card memory. Use lower settings to store more in
memory, or for email, PC viewing only, etc.
12
Imageview 110834 1LIM fin12 12
3/5/07 1:58:36 PM
