EFFICIENT OPERATION
VENTILATION
Two vents need to be provided from the rear of the fridge cavity to the outside
environment, or to the general area where the fridge is located. The vents
should be located at the bottom and top of the fridge cavity and have a free
cross section of at least 200cm2 each. This allows for natural thermal air
flows across the condenser.
MOUNTING KIT
The mounting kit is first affixed to the side and top of the fridge cabinet using
the screws provided.
Once the fridge has been connected to the power supply and moved into its
final position, the mounting kit can be affixed to the front of the cavity.
OPERATING THE FRIDGE
THERMOSTAT
•
Turn the thermostat knob around from 0 to power up the fridge.
•
The cooling level can be set between 1 and 7.
•
7 is the coldest setting and 1 is the warmest.
EQUALISING THE FRIDGE
During the first 24 hours of operation, your compressor will operate for longer
than usual. This process allows the internal air temperature, food, drinks,
condenser and insulation to equalise.
ENERGY SAVING TIPS
•
Have a much ventilation as possible – the more the better.
•
Keep the fridge out of direct sunlight whenever possible
•
Only open the fridge or freezer door when necessary
•
Allow hot food to cool down before placing inside the fridge
•
Defrost the fridge as soon as a layer of ice forms
•
Set the fridge to be only as cold as necessary
