User Instructions
Before first use
Before using your appliance for the first time:
y
Set the water softener
y
Pour ½ litre of water inside the salt container
and then fill with dishwasher salt
y
Fill the rinse aid dispenser
y
Fill in detergent
Water Softener
The dishwasher is designed with a softener to
eliminate the minerals and lime from the water
supply. The hardness of the water supply varies
from place to place and will affect the
dishwasher performance. The amount of salt
consumed can be adjusted based on the
hardness of the water used. This is intended to
optimise and customize the level of salt
consumption.
Adjusting salt consumption
1. Unscrew and remove the cap from the salt
container.
2. There is a ring on the container with an arrow.
Rotate the ring in anticlockwise direction from
“-“ sign towards “+” sign, based on the table at
right.
Loading the salt into softener
1. Remove the lower basket and then unscrew
and remove the cap from the salt container.
(Fig 1)
2. Fill 1L of water into the salt container.
3. Place the funnel end (supplied) into the hole
and add around 1kg of salt. It is normal if a
small amount of water coming out from salt
container. (Fig 2)
4. Screw the cap tightly back clockwise.
5. Immediately after filling the salt, a washing
cycle should be started (soak or rapid
program suggested). Otherwise the filter
system or pump may be damaged by salty
water.
Important:
y
Only use dishwasher salt
y
Add the salt again when the salt warning light
at control panel is on.
y
It takes time to dissolve the salt so the salt
warning light may still come on even the salt
container is filled.
Water
hardness
(
°
Clarke)
Selector
position
Salt
consumption
(gram/cycle)
Autonomy
(cycle/
1kg)
0 ~ 10
/
0
/
10 ~ 28
-
20
50
28 ~ 56
Mid
40
25
56 ~ 75
+
60
16
10
