Bush WO378, Instruction Manual

Page: 22 / 52

Using your CD Micro Hi-Fi
22
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Using your CD Micro HiFi
Let’s get started
DAB radio mode
Check that your HiFi is in DAB radio mode. If you are not already in DAB mode, briefly
press and release the Mode button on the front of the HiFi, until you are in DAB mode
(check the display).
The first time you use the Radio or if the station list is empty, your HiFi will automatically
begin to scan for DAB radio stations. A progress bar will show the progress of the scan and
the number of stations found during the scan will also be displayed.
When the scan is complete your HiFi will select the first available station and begin to play.
Stations are listed in numerical and then alphabetical order by default.
Telescopic radio aerial
Please make sure that the telescopic aerial on the back of the HiFi is fully extended
and adjusted before you attempt to tune to a DAB radio station (a vertical position is
recommended). This will ensure that the maximum signal strength is available when the
HiFi begins to scan. Extending the aerial also ensures the best possible sound quality.
Changing DAB stations
In DAB mode:
1. Use the rotary navigation control to scroll through the available stations in the station
list.
2.
When the station that you would like to listen to is displayed press the rotary navigation
control to Select. There will be a short delay whilst your HiFi tunes to your selected
station.
Scanning for DAB stations
With DAB radio, additional stations and services regularly become available so it’s a good
idea to carry out a manual scan every now and then to make sure that you have the most
up to date station listing stored within the memory of your HiFi.