Bush WO280, Instruction Manual

Page: 30 / 44

Using your Compact Digital Radio
Let’s get started
Using your Compact Digital Radio
30
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Software version
You can check the software version of your radio.
In DAB or FM mode:
1.
Press and hold the Menu button to enter the menu options
2. Use the Prev or Next button to display ‘<System>’. Press and release the rotary
Volume control to Select.
3. Use the Prev or Next button to display ‘<SW Version>’. Press and release the rotary
Volume control to Select.
The software version will be displayed and you may wish to make a note of it here:
...................................................................................
4. Press and release the Menu button to return to the station display.
Factory reset
You can reset your radio and restore all of the original factory settings.
Note: If you reset your radio all of your stored station presets will be deleted.
In DAB or FM mode:
1. Press and hold the Menu button to enter the menu options
2. Use the Prev or Next button to display ‘<System>’. Press and release the rotary
Volume control to Select.
3.
Use the Prev or Next button to display ‘<Factory reset>’. Press and release the rotary
Volume control to Select.
4. ‘Factory Reset? <No> Yes’ will be displayed. Use the Prev or Next button to move to
‘<Yes>’. Press and release the rotary Volume control to Select.
5. ‘Restarting...’ is displayed, followed by ‘Welcome to Digital Radio’.