Bush SB03, Instruction Manual

Page: 17 / 32

Using your Soundbar
Let’s get started
Using your Soundbar
17
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Pairing with a Bluetooth device
Before you can use your Sound bar in Bluetooth mode
with your TV or other Bluetooth capable device, you
need to ‘pair’ it.
1. When you first power on your Soundbar or when
you change the mode to Bluetooth, the blue LED
on the front of the product will flash quickly whilst
your product searches for Bluetooth devices.
2.
On the device that you would like to connect
to your Soundbar via Bluetooth (e.g. TV/iPhone/
iPad/Android/other phone/Tablet/Computer), turn
on Bluetooth connectivity and ensure that it is
‘discoverable’.
Note : If necessary, refer to the instructions for your
device to add or set up Bluetooth.
3. When found, your Soundbar will be displayed as
‘BUSH Sound bar’. Select the device name to begin
pairing.
Note : If your device requests a password, please
enter ‘0000’ to complete the device pairing.
4. When pairing is complete a tone will sound and
the blue LED will change to be continuously on
(not flashing).
Note : After approximately 60 seconds the blue
LED will turn off. You can press any button on the
remote control, to turn the LED back on again.
5.
Now that you have paired your device with the
Soundbar, it will connect to it when it is within
range, which is about 10 metres or less (33 feet or
less), line of sight.
6. Your device will remain paired with the Soundbar
unless you decide to disconnect or ‘unpair’ it.
Note : You can press and hold the Pair button on the
remote control to unpair your current device and
search for new devices.
Controlling a paired device
Once paired you can either use the controls on the
connected audio device to play/pause, skip tracks etc.,
or you can you the control buttons on the Soundbar
remote control.
Play/Pause
Press and release to skip forward
Press and release to skip back
Aux in mode
Check that your Soundbar is in Aux in mode. If you
are not already in Aux in mode, press and release the
Source button on the Soundbar or on the remote
control to go to Aux in mode. The blue LED behind
the front lens will move to indicate this.
1. Connect one end of a 3.5mm audio cable to
the headphone (or auxiliary out) socket of your
secondary device.
2. Connect the other end to the Aux in socket on the
back of your Soundbar.
3.
Press the Play button on your external device to
start playback through the Soundbar.
4. To gain optimal volume levels, adjust the volume
level on both the secondary device and on the
Soundbar.
Note
: It is recommended that you unplug the audio
cable from the Aux in socket on the back of the
Soundbar, after you have finished listening to your
external device.