Bush PT-941, Instruction Manual

Page: 8 / 17

Getting to know your Party Speaker
You’ll be up and running in no time
Getting to know your Party Speaker
You’ll be up and running in no time
Getting to know your Party Speaker
Getting to know your Party Speaker
14
15
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
With the Party speaker powered on and in any mode:
1. Connect the mobile device charging cable (not supplied) to your mobile device and
plug the standard USB plug end into the USB 5V/1A charge socket on your Party
speaker
2. Your Party speaker will now begin to charge your mobile device. Please check the
display.
Microphone sockets
Your Party speaker has two microphone sockets . When you
connect a microphone, the MIC FIRST feature becomes active and the music sound is
lowered so that the microphone can be heard. You can short press the MIC FIRST button
to turn this feature on or off.
You can adjust the volume and effect of the microphone by using the MIC VOL and MIC
ECHO rotary controls on the top of the Party speaker.
Adjusting the volume
Turn the large central volume control clockwise to increase the volume and anti-
clockwise to decrease the volume. There are a maximum of 30 volume levels on your
Party speaker, please check the display when you adjust the volume.
Equaliser (EQ) function
The sound on your Party speaker can be adjusted to suit the type of music or radio
programme that you are listending to using the EQ function. The 10 options available are:
Classic, Rock, Pop, Jazz, Live, Club, Dance, Hall, Soft and Flat.
1. Repeatedly short press the EQ button to cycle through the EQ options available. Stop
when the EQ setting you would like is displayed.
Mega Bass
Short press the MEGA BASS button to turn the Mega Bass on or off.
Tone
1. Short press the TONE button to access the Party speaker bass and treble settings.
2.
When a ‘b’ for Bass or a ‘t’ for Treble is displayed, use the large central volume control
to adjust the settings. There are 10 levels available for Bass and Treble.
3. Short press the TONE button again to switch between the Bass (b), Treble (t) and
Volume settings.
Mute
1. Short press the MUTE button to turn the volume off.. U-00 will be displayed and then
the product will revert to the current Mode display, e.g. -bt-.
2. Short press the MUTE button to turn the volume on again.
Top face light
Your Party speaker has 8 different light settings for the top small light panel.
Repeatedly short press the FACE button to cycle through the light options available.
Stop when you can see the your preferred light effect.
Main speaker light
Your Party speaker has 9 different light settings for the main speaker light.
Repeatedly short press the SPEAKER button to cycle through the light options
available. Stop when you can see the your preferred light effect.