Bush NE-6451, Instruction Manual

Page: 13 / 40

13
Getting to know your DAB/ FM/ Internet Radio
You’ll be up and running in no time
remote control operation range
∞ The remote control sensor on the front unit is sensitive
to the remote control’s commands up to a maximum
of 4 metres away and within a maximum of 60° arc.
∞ Please note that the operating distance may vary
depending on the brightness of the room.
Getting to know your DAB/ FM/ Internet Radio
Network Connection
Wired network
1. Check first of all whether the status lights (LINK/ACT) of your LAN connection or your router
light up.
2. Connect the NETWORK socket on the unit to the corresponding port on your Router using a
commercially available Ethernet cable.
3. Proceed with the operations described in the below “GETTING STARTED” . It is not necessary
to run through the setup wizard.
4. Using a wired network provides a better performance than a wireless connection because
the attached devices connect directly to the network and are not subject to radio frequency
interference.
Wireless network
1. Check first of all whether the status lights (LINK/ACT) of your LAN connection or your router
light up.
2. Proceed with the operations described in the below “GETTING STARTED” . It is highly
recommended to run through the setup wizard in the System Settings section.
This unit cannot be connected to a standalone modem directly. A router or a modem
incorporated with a router has to be used.
Since there are various connection congurations, please follow the specifications and
instructions of your telecommunication carrier, Internet service provider, and router
setting guidebook.