Bush NE-3313, Instruction Manual

Page: 28 / 43

28
Using your DAB/FM Digital Radio
Let’s get started
Using your DAB/FM Digital Radio
ACTIVATING AND USING THE ALARM (in standby mode only)
1. Switch the radio into standby mode.
2. Press the ALARM / SNOOZE button to display the current status of
the alarms (e.g. Alarm 1: on and Alarm 2:off).
3. Press the button again to change the status to the next one in
the sequence below until the status of choice is displayed. Press
the SELECT button to accept. An active alarm is indicated by a
corresponding alarm icon (bell) in the display.
4. Once the alarm has been set and activated, when the time on the
clock is the same as the alarm time that has been set, the alarm will
sound and the volume will gradually increase in volume to the one
that has been set.
5. The alarm will continue to sound and stop automatically after the
time interval that has been set (step 9.1.4 above). To silence the
alarm, press the STANDBY (
) button. If a repeat alarm has been
set, the alarm indicator will remain illuminated and the alarm will
sound again at the next programmed day unless the alarm has
been turn off.
6. To activate the snooze function, press the ALARM / SNOOZE button
when the alarm sounds. The alarm
will silence, the display will display
the clock and the snooze interval
remaining and the (Zz) indicator
(fig. 16). The alarm will sound again
07:03:45
Snooze 1:05