Bush NE-3313, Instruction Manual

Page: 23 / 43

23
Using your DAB/FM Digital Radio
Let’s get started
Using your DAB/FM Digital Radio
allowed’ is selected the radio will automatically switch between
stereo and mono mode. Once the audio mode of choice is
displayed, press the SELECT button to accept.
5. To set the scan criteria, press the MENU button and press the
TUNNING (
◄
) or (
►
) buttons until ‘Scan setting’ is displayed.
Press the SELECT button to accept. Use the TUNNING (
◄
) or (
►
)
buttons to switch from ‘All stations’ to ‘Strong stations’ and again to
switch back. If ‘strong stations’ is selected the radio will only scan
for strong stations. Once the scan criteria of choice is displayed
press the SELECT button to accept.
6. If an FM RDS (Radio Data Signal) is present, the display will
automatically show the station name and radio text (if available).
FM DISPLAY MODES
This function allows information relating to the current station to be
shown in the second line of the display.
If the INFO button is then pressed repeatedly, the second line of the
station display will scroll through the following modes with each
subsequent press of the button (fig.10).
• Time - the time will be automatically updated by the radio time
signal.
• Date - the date will be automatically updated by the radio time
signal.
• Radio text - the broadcaster may include a scrolling message about
the current programme.
• Programme type – this describes the style / genre of the
programme. If the information is not available the display will show
‘<Programme type>’.