Bush NE-2151, Instruction Manual

Page: 27 / 42

27
Using your DAB/FM Digital Radio
Let’s get started
Using your DAB/FM Digital Radio
5. Press SCROLL/SELECT/SCAN dial to start the system reset,
“Restarting…” will show on the display. After the reset is complete,
the unit will enter Standby mode if it is using mains power, or will
start DAB full scan if it is using battery power.
Software Version
1. Switch on the radio, press the
MENU
button to display the menu.
2. Turn the SCROLL/SELECT/SCAN dial to select <System>, and
then press SCROLL/SELECT/SCAN dial to confirm.
3. Turn the SCROLL/SELECT/SCAN dial to select <SW version>, and
then press SCROLL/SELECT/SCAN dial to confirm.
4. The software version will show on the display.
5. Press MENU button to exit the menu.
Setting the Alarm (Mains Operation Only)
Make sure you have preset FM and DAB stations before setting the
Alarm.
1.
The unit has two alarms. Press MENU
button to enter the menu.
2. Turn the SCROLL/SELECT/SCAN dial to
select “System” and then press SCROLL/
SELECT/SCAN dial to confirm.
3. Turn the SCROLL/SELECT/SCAN dial to select “Alarm” and then
press
SCROLL/SELECT/SCAN
dial to confirm.
4. Turn the SCROLL/SELECT/SCAN dial to select “Alarm 1” or “Alarm
2” and then press the SCROLL/SELECT/SCAN dial to confirm.
5. Turn the SCROLL/SELECT/SCAN dial to select “Alarm 1 Setup” or
“Alarm 2 Setup” and then press the SCROLL/SELECT/SCAN dial
After the factory reset, all the tuned stations, DAB & FM preset
stations will be erased.