Bush NE-2151, Instruction Manual

Page: 13 / 42

13
Getting to know your DAB/FM Digital Radio
You’ll be up and running in no time
Getting to know your DAB/FM Digital Radio
Power Source
Mains Power
1. Connecting the unit to any other power source may cause damage
the unit.
2. Unwind the mains adaptor cable to its full length.
3. Connect the end of the cable to the DC IN Socket at the right
side of the unit and then connect the mains adaptor to the mains
socket. Make sure the mains adaptor is firmly inserted into the main
socket. The unit is now ready to use.
4. To switch the unit off completely, unplug the mains plug from the
mains socket.
Battery Power
1. Connect the mains adapter to the DC IN socket on the unit.
Connect the other end to the mains socket.
2. Battery will automatically start charging whilst in STANDBY mode.
3. To check the charged capacity, switch on the unit and press INFO
button repeatedly until the display shows <charging #>. When the
battery is charged to full capacity, it will show Battery Full.
4. Remove the main adapter. The battery is now ready for use.
• The battery is partially charged at shipment. Charge the battery
to full for the first time use.
• When the radio is connected to the mains and in use, the
battery will be recharged but at a much slower rate.
• Do not disconnect the mains power adapter during charging.
• It is normal for the battery to become warm during charging.
• Do not use the battery under high temperature or near heat
sources.