13
For any help concerning set up and use of your TV please call the
Customer Helpline: 0845 604 0105
1.
Connect one end of the RF coaxial cable to
the aerial socket on the wall and the other
HQGRIWKHFDEOHWRWKH5)ȍVRFNHWDW
the rear left side of your TV.
2.
Connect the mains cable to the mains socket
after you have completed all the connections.
3.
Switch on the
POWER ON/OFF
switch which
is located at the rear left of the TV. At this
VWDJHWKH79VZLWFKHVWRVWDQGE\PRGH7KH
red LED indicator will illuminate on the front
panel of the TV.
4.
,QVWDQGE\PRGHSUHVVWKH
POWER
button
at the bottom of the TV or the button on
the remote control to turn the TV on. The red
LED indicator will turn blue.
5.
7KHILUVWWLPH\RXWXUQWKH79RQLWZLOOJR
straight into
First Time Setup
menu. Press
the
buttons to navigate the menu and
change the settings.
OSD Language
Selects your desired language to be
displayed on the menu. The default
on-screen menu language is set as English.
Mode Setting
Selects your desired mode setting.
Home Mode: Viewing at home.
6WRUH0RGH)RUVWRUHGHPRWKHEULJKWQHVV
is higher than home mode.
Country
Selects the country where you will operate
the TV. The default country is set as UK.
Auto Scan
Selects the auto scan type: DTV+ATV / DTV /
ATV.
Start
Press the
OK
button to start auto tuning. Auto
Scan will commence. The display will show
the progress of the tuning and the number of
channels found.
Getting Started
Initial setup
Press the
SOURCE
button on the remote
control and select DTV to switch the TV to
Digital Terrestrial Television Broadcasting.
Information Banner
Whenever you change channel using the
CH+/
CH-
EXWWRQVRUWKHQXPEHUEXWWRQVWKH79
displays the broadcast picture along with an
information banner on the top left of the screen
(available only in DTV/ATV mode).
The information banner can be displayed at
any time while watching TV by pressing the
DISPLAY
button on the remote control.
General operation
6.
,I\RXZDQWWRVNLSWKH'79WXQLQJSUHVVWKH
MENU
button to interrupt the tuning half way.
You will then go straight to ATV tuning. You
may repeat the above step if you also want to
skip the ATV tuning.
Initial setup
Auto Scan
Scanning CH34
Digital Channels Found:
DTV :10 Radio :0 Data:0
Analog Channels Found: 0
MENU: Skip EXIT: Exit
First Time Setup
OSD Language
Mode Setting
Country
Auto Scan
English
Home Mode
UK
DTV+ATV
Start
Move
Adjust
MENU: Return EXIT: Exit
LE-40GCL-A FHD 铁灰色 （英国 SY13100）_IM V01.indd 13
2013-5-2 16:58:40
