Bush LCD32F1080P Instruction Manual Download Page 18

Page: 18 / 51

English

- 17 -

Switching the TV On/Off

To Switch the TV On

•

Connect the power cord to the 220-240V AC ,

50 Hz.

•

Press

STANDBY

button. Then the standby

LED lights up.

• To switch on the TV from standby mode either:

• Press the

button,

P+ / P-

or a numeric

button on the remote control.

• Press the

-P/CH

P/CH+

button on the TV.

The TV will then switch on.

Note

: If you switch on your TV via PROGRAM

UP/DOWN buttons on the remote control
or on the TV set, the programme that
you were watching last will be reselected.

To Switch the TV Off

• Press the button on the remote control or

STANDBY

button on the TV, so the TV will

switch to standby mode.

• To power down the TV completely, unplug

the power cord from the mains socket.

Navigating the Menu System

For displaying

menu options

For navigation

To confirm choices

•

Press

to display the main menu.

•

Press or button to select an icon. Press

button for more options.

•

Use or button to highlight.

•

Press or buttons to change the settings.

Press

to set as default.

•

To exit the menu or return from sub-menu

screen, press

Note

: These explanations are valid for the

navigation of the whole menu system.
To select options that are explained in
the following parts, refer to “Navigating
the Menu System”.

ENG-32761-1205UK-32 INCH 17MB26 UK IDTV-(WO SVHS-ECO PIP)(3D PANORAMA)-50138695.p65

19.11.2008, 08:34

Summary of Contents for LCD32F1080P




















































Search results

Summary of Contents for LCD32F1080P

Reviews:

Related manuals for LCD32F1080P

Brands by name

Popular brands

Bush LCD32F1080P, Instruction Manual

Search results

Summary of Contents for LCD32F1080P

Reviews:

Related manuals for LCD32F1080P

Brands by name

Popular brands