7
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
TV Control Buttons & Operation
TV/A
V
MENU
P/CH
1.
Standby On/Off button
2.
TV/AV button
3.
Programme Up/Down buttons
4.
Volume Up/Down buttons
Operation with the Buttons on the
TV
Press
button to decrease volume or
button to increase volume.
Press
P/
CH +
button to select the next programme
or
P/CH -
button to select the previous
programme.
Press the
or
button at the same
time to view main menu. In the Main menu
select sub-menu using
TV/AV
button and set the
sub-menu using
or
buttons. To see what
options are available via the menu, refer to the menu
system section of this manual.
Press the
TV/AV
button
in the control panel on the TV to switch between AV modes.
Note: Function indications of the buttons will be
displayed on the screen when pressed.
Inserting the Batteries into the Remote
Lift the cover on the back of the remote upward
gently. Install two
AAA
batteries. Make sure to
match the + and - ends of the batteries in the
battery compartment (observe the correct polarity)
Replace the cover.
Connect Power
IMPORTANT
: The TV set is designed to operate on
220-240V AC, 50 Hz
socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna Connection
Connect the aerial plug to AERIAL INPUT (ANT-TV)
socket located on the rear bottom side of the TV.
Rear bottom side of the TV:
Notification
Manufactured under license from Dolby Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
“HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.”
“DLNA, the DLNA Logo and DLNA CERTIFIED
are
trademarks, service marks, or certification marks of
the Digital Living Network Alliance.”
“YouTube and the YouTube logo are trademarks of
Google Inc.”
