Bush DWINT125W, Instruction Manual

Page: 17 / 38

17
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on
dishwasher
0345 257 7271.
Installing your dishwasher
Bringing it all together
For best operating results, incoming water pressure should
be between 0.04 and 1 Mpa.
Your dishwasher cleans by spraying a mixture of hot clean
water and detergent (under pressure) against the soiled
surface of dishes. The water is pumped through a rotating
spray arm, drained through a filter removing food and soiled
particles and pumped back through the spray arm.
Note: Hard water conditions will adversely affect the
performance of your dishwasher. To minimise this
condition, it is recommended to periodically operate/rinse
the dishwasher in empty condition using 1 cup of white
vinegar (at least once a week).
Important: Once you open the water supply (even if it is
closed immediately thereafter), the water inlet hose will be
pressurised.
Water pressure
M
A
X 1
0
0
0
m
m
A
Counter
Front
Drain pipe
NOTE
The top of the hose
must be less than
1000mm.
φ
40mm
B
PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B
Dimensions
Height:815mm
Width:598mm
Depth:550mm
598
815
115
0
(with the door closed)
550