Bush DTC8021, Instruction Manual, Page: 8 / 22

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105
If you require any technical guidance or find that your product is not operating as intended, a simple solution can
often be found in the
Troubleshooting
section of these instructions,
Getting to know your ShowDrive Digital TV Recorder
You’ll be up and running in no time
Getting to know your ShowDrive Digital TV Recorder
You’ll be up and running in no time
Getting to know your ShowDrive Digital TV Recorder Getting to know your ShowDrive Digital TV Recorder
14 15
Connect to your TV
Use the included HDMI cable to
connect your box to your TV’s HDMI
input, or if you are using a Surround
Sound AV Reciever, to an HDMI
input on your AV Receiver.
Connect the power supply
Using the included Power Supply,
connect your box to a power
socket. Turn on your TV and select
the appropriate HDMI input (or AV
Receiver settings if you are using
one).
Put the included batteries
in the remote control
Be sure to follow the polarity
indicators in the battery
compartment.
That’s it! All your hardware
connection should be set. Next,
follow the on-screen instructions to
complete your set-up.
First time set-up
Your box will now lead you through
a series of on-screen menus as you
complete your set up.
Welcome
If you see this screen, then you
know for sure that your box is
powered up, connected to your TV,
and your TV is on the right input.
Press “OK” button on the remote to
start the set-up process.
Scanning for channels
The first step in getting you up
and running is to scan your aerial
antenna for a signal. This will take
10-15 minutes, and will continue in
the background while you continue
through the setup.