Bush DLED50UHDHDRSA, Instruction Manual

Page: 33 / 64

Network Menu Content
Network Type
Disable the network connection or change the connection type.
Scan Wireless Networks
Start a search for wireless networks. This option will be available if the Network Type is
set as
Wireless Device
.
Press WPS on your wifi
router
If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press
OK . Go to your modem/router device and press the WPS
button on it to make the connection. This option will be available if the
Network Type
is set as
Wireless Device
.
Internet Speed Test
Start a speed test to check your connection bandwidth. The result will be displayed on
the screen when finished.
Advanced Settings Change the IP and DNS configurations of your TV.
Networked Standby
Mode
Enable or disable this feature by setting it as On or Off .
Note: For detailed information on the options of this menu refer to the Connectivity section.
Installation Menu Content
Automatic channel scan
(Retune)
Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.
Manual channel scan This feature can be used for direct broadcast entry.
Network channel scan
Searches for the linked channels in the broadcast system.
D. Aerial:
Searches for aerial
network channels.
Signal Information
You can use this menu item to monitor signal related information such as signal level/
quality, network name, etc. for available frequencies.
First time installation Deletes all stored channels and settings, resets TV to factory settings.
Advanced features
Getting the most from your TV
Advanced features 31
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the
Troubleshooting
section of these instructions,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.