Bush DLED49FHDS, Instruction Manual

Page: 19 / 57

TV Control Switch & Operation
1.
Up direction
2.
Down direction
3.
Volume / Info / Sources List selection and Standby-
On switch
The Control button allows you to control the Volume /
Programme / Source and Standby-On functions of the TV.
To change volume: Increase the volume by pushing the
button up. Decrease the volume by pushing the button
down.
To change channel: Press the middle of the button in,
the information banner will appear on the screen. Scroll
through the stored channels by pushing the button up
or down.
To change source:
Press the middle of the button in
twice(for the second time in total), the source list will
appear on the screen. Scroll through the available sources
by pushing the button up or down.
To turn the TV off:
Press the middle of the button in
and hold it down for a few seconds, the TV will turn into
standby mode.
To turn on the TV: Press the middle of the button in, the
TV will turn on.
Notes:
If you turn the TV off, this cycle starts again beginning
with the volume setting.
Main menu OSD cannot be displayed via control button.
Operation with the Remote Control
Press the Home button on your remote control to display
main menu. Use the directional buttons and OK button
to navigate and set. Press Return/Back or Home button
to quit a menu screen.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources. Press the
Source
button on your remote control consecutively to
select the different sources.
Changing Channels and Volume
You can change the channel and adjust the volume by
using the
Pro/- and /- buttons on
the remote.
Using Main TV Menu
When the Home button is pressed, the main TV menu
will appear at the bottom of the screen. You can navigate
through the menu items using the directional buttons
on the remote. To select an item or see the sub-menu
options of the highlighted menu press
OK button. When
you highlight a menu option some of the sub-menu
items of this menu may appear on the upper side of the
menu bar for quick access. To use a quick access item
highlight it, press
OK and set as desired using the Left/
Right directional buttons. When finished press OK or
Back/Return button to exit.
Press Exit button to close the main menu.
4. Home
When main menu is opened
Home
menu bar will be
highlighted. The content of the
Home
menu can be
customised by adding options from other menus. Just
highlight an option and press the Down direction button
on the remote. If you see
Add to Home
option you can
add it to the
Home
menu. Same way you can delete or
change the position of any item in the
Home
menu. Press
the Down direction button and select
Delete
or
Move
option and press
OK
. In order to move a menu item use
the Right and Left direction buttons to select the position
that you want the item to move to and press
OK
.
5. TV
5.1. Guide
You can access the electronic programme guide menu
using this option. Refer to
Electronic Programme Guide
section for more information.
5.2. Channels
You can access the Channels menu using this option.
Refer to Using the Channel List section for more
information.
5.3. Timers
You can set timers for future events using the options of
this menu. You can also review the previously created
timers under this menu.
To add a new timer select the
Add Timer
tab using the
Left/Right buttons and press
OK
. Set the sub-menu
options as desired and when finished press
OK
. A new
timer will be created.
Standard features
Simple everyday use
Standard features 18
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,