Bush DLED43287FHDDVD, Instruction Manual

Page: 14 / 48

Remote Control
1 2 3
4 5
6
0
LANG.
BACK
MENU
OK
EXIT
Q.MENU
/
V
/
V P
P
7 8 9
.,/@
1. Standby: Switches On / Off the TV
2. Numeric buttons:
Switches the channel, enters a number or a
letter in the text box on the screen.
3. TV: Displays channel list / Switches to TV Source
4. Mute:
Completely turns off the volume of the TV
5. /-
6. Menu:
Displays TV menu
7. Directional buttons: Helps navigate menus, content etc. and
displays the subpages in TXT mode when pressed Right or Left
8. OK: Confirms user selections, holds the page (in TXT mode),
views channel list (DTV mode)
9. Back/Return: Returns to previous screen, opens index page
(in TXT mode)
10. Media browser: Opens the media browsing screen
11. Info: Displays information about on-screen content, shows
hidden information (reveal - in TXT mode)
12. My button 1 (*)
13. Coloured Buttons:
Follow the on-screen instructions for
coloured button functions
14. Language: Displays and changes audio/subtitle language (digital
TV, where available)
15. Subtitles: Turns subtitles on and off (where available)
16. Rapid reverse: Moves frames backwards in media such as
movies
17. No function
18. Play:
Starts to play selected media
19. Stop: Stops the media being played
20. Rapid advance:
Moves frames forward in media such as movies
21. Pause: Pauses the media being played
22. Screen: Changes the aspect ratio of the screen
23. Text:
Displays teletext (where available), press again to
superimpose the teletext over a normal broadcast picture (mix)
24. My button 2 (*)
25. EPG (Electronic programme guide):
Displays the electronic
programme guide
26. Exit:
Closes and exits from displayed menus or returns to
previous screen
27. Quick Menu: Displays a list of menus for quick access
28. No function
29. Pro/-
30. Swap:
Quickly cycles between previous and current channels
or sources
31. Source:
Shows all available broadcast and content sources
(*) MY BUTTON 1 & MY BUTTON 2:
These buttons may have default functions depending on the model.
However you can set a special function to these buttons by pressing
on them for five seconds when on a desired source or channel. A
confirmation message will be displayed on the screen. Now the
selected MY BUTTON is associated with the selected function.
Note that if you perform
First Time Installation , MY BUTTON 1&2
will return to their default function.
Getting to know your TV
You’ll be up and running in no time
Getting to know your TV
12
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,