Bush DFTA45R, Instruction Manual

Page: 20 / 28

(3) Restore Factory Default
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select [Restore Factory Default] and press OK or RIGHT to
select. Enter your password or the default password '000000' and press OK to
confirm. This option will delete all preset channels and settings.
(4) Information
View model, hardware and software information.
(5) Software Update
When this option is set to "On", the Set Top Box will begin to search for new
software automatically, from over air broadcasts based on your set time in
"Start Time".
(11)USB
To access the Menu, press the MENU button and select [USB]. The menu
provides options to playback Music and Photo files, it can support
MP3,WMA,JPEG,BMP files, The unit will only support USB device with
FAT and FAT32 file system. It will not support NTFS file system.
(1) Multimedia : Once your USB is plugged in, you can select the Music or
Photo type in the multimedia menu. Press OK to enter the file browser and
select the file you wish to play.
Please note: If no USB device is plugged in, a warning message "No USB
Device is Found" will be displayed.
(2) Photo configure :
You can select on of the following settings to for your photo slide show options.
-Slide Time: You can adjust slide show interval from 1~8 seconds.
-Slide Mode : You can adjust slide show effect as mode 0~59 or random.
-Aspect Ratio : You can displays the picture as its original aspect.
- Discard displays the picture in full screen mode.
18