Bush DFTA13HD, Instruction Manual

Page: 35 / 38

If you experience problems with this receiver or its installation, in the first instance please
read carefully the relevant sections of this User Manual and this Troubleshooting section.
Problem Possible cause What to do
Main lead unplugged Check mains lead LED light on front panel not lit
Main fuse blown Check fuse
Aerial is disconnected
Aerial is damaged/misaligned Check aerial lead
Check aerial No signal found
Out of digital signal area Check with dealer
No picture or sound
Program not broadcasting now
Return to another
channel
Mosaic blocks in picture or
picture freezes Aerial may not be compatible Check aerial
Scrambled channel message Channel is scrambled Select an alternative
channel
Forgotten channel lock code Use the override code
(4000)
Receiver off Plug in and turn on
receiver
Handset not aimed correctly Aim handset at front
panel
Front panel obstructed Check for obstructions
Remote control batteries are
inserted incorrectly Check batteries
direction
No response to remote
control
Handset batteries exhausted Replace remote
control batteries
After moving the receiver to
another room, can t
'
receive
a digital reception
The aerial feed may come
through a distribution system
which may reduce the digital
signal now received by the
receiver Try a direct feed from
the antenna
Warning: If this doesn’t work, contact a qualified repair technician, never attempt to repair
the receiver yourself.
34
Trouble Shooting