1. To enable the alarm function, use the
ALARM 1/2
buttons(6,7) to select
buzzer or radio. The selected alarm mode indicator (2,3) will light up.
2. The buzzer or radio will come on at the set time.
3. To stop the alarm, press the
AL OFF
button(8). The alarm will sound
again the next day.
Note:
While the buzzer alarm volume is fixed and cannot be adjusted, the
radio alarm volume can be adjusted to your desired level using the
VOLUME
buttons(6,7). To select a radio station to wake up to, see the section
on “
USING THE RADIO
”.
SNOOZE FUNCTION
USING THE ALARM FUNCTION
When the alarm sounds, press the
SNOOZE
button(12). The alarm mode
indicator will flash and the alarm will sound again after 9 minutes. To
cancel the SNOOZE function and repeat the alarm the next day, press the
AL OFF
button(8).
SLEEP FUNCTION
With this function, you can listen to the radio for up to 120 minutes, after
which it will turn off automatically.
1. When the unit is switched on, press the
SLEEP
button(12) repeatedly to
select the duration: 120, 90, 60, 45, 30, 15, 05 minutes or OFF.
2. At the end of the set time, the radio turns off automatically.
3. To cancel the sleep function before the end of the set time, press the
button(8) to turn off the radio immediately.
USING THE RADIO
1. Press the button(8) to turn on the radio.
2. Press and hold one of the
<TUNING>
buttons(9,10) to start automatic
tuning up/down. Release the button when the unit is receiving a station
you would like to listen to. For manual fine-tuning, you can press it
briefly to adjust the frequency step by step.
3. Press the button(8) to turn off the radio.
FOR OPTIMUM RECEPTION
Extend and position the FM antenna to achieve optimum reception.
PRESET RADIO STATIONS
You can store up to 20 stations.
Use the
<TUNING>
buttons(9,10) to search for a station. Press and hold
the
MEMORY
button(11) to store the station and a number to be assigned
for the preset will be displayed.
5
