Page 10
Scan modes (cont)
3:
Use the
TUNE-
or
TUNE+
(26
,
46)
buttons to select
between
LOCAL (Strong local stations only)
or
DX (All
available stations)
.
4:
Press
ENTER
button
(45)
to save the setting and
MENU
to exit .
Stereo / mono mode
Sometimes Stereo radio stations can suffer from
interference (static & crackles) to reduce this problem
you can enable MONO mode.
1:
Press the
MENU
button
(24)
.
2:
When the
‘SCAN UP’
option appears press either
TUNE-
or
TUNE+
(26
,
46)
button and locate
‘AUDIO’
,
press the
ENTER
button
(45)
.
3:
Use the
TUNE-
or
TUNE+
(26
,
46)
buttons to select
between
STERO
or
MONO .
4:
Press
ENTER
button
(45)
to save the setting and
MENU
to exit .
Display modes
Every time you press the “INFO” button (23) on the
remote control, the display will cycle through the
following display modes: The information is displayed
on the lower segment of the LCD display.
Audio Mode (St/Mono)
Program Name
Radio Text
Time
Date
Program Type
Radio text
As with DAB, broadcasters can include a scrolling text
that displays information about the current program . If
radio text is not available then the display will show ‘NO
TEXT’ .
Program type
This describes the “Style” or “genre” of music that is
being broadcast e .g . “Rock “or “Classical” .
Program name
Displays the frequency of the current station .
Audio mode
Displays the current FM mode of STEREO or MONO .
Display modes (cont)
Time & date
The time & date can be set automatically from the DAB
or FM broadcast or set manually . Follow the steps on
page 12 to set manually .
Advanced audio adjustment
EQ modes
1:
Press the
EQ
button
(33)
on the remote control
repeatedly to cycle through the available sound
EQ
presets of:
FLAT
,
JAZZ
,
ROCK
,
POP
&
CLASSIC .
Bass / Treble adjustment
1:
Press the
BASS
button
(30)
‘BASS’
will appear on the
display with a number next to it denoting the Bass
level . Use the
VOL
+/- buttons
(38
,
39)
to increase or
decrease the Bass level .
2:
Press the
TREBLE
button
(31)
‘TRE’
will appear on the
display with a number next to it denoting the Treble
level . Use the
VOL
+/- buttons
(38
,
39)
to increase or
decrease the Treble level .
Connecting an external audio source
Follow the steps below to connect the unit to an
external audio device using a 3.5mm to PHONO audio
cable (not supplied).
1:
Connect the
3
.
5
mm plug end of the cable
(not
supplied)
to an audio sources headphone / Line
output and the
RED
&
WHITE
sockets to the
LINE IN
input
(18)
sockets on the rear of the unit .
NOTE: You must match the RED plug to the RED
socket and the WHITE plug to the WHITE socket.
R
SPEAKER
+
-
L
+
-
LINE-IN
User instructions