
Page 8
User instructions
Bluetooth status table
‘BT’ state
Reason
‘BT’ solid (no flash)
• Connected
‘BT’ flash rapidly
• Auto re-connecting with last
paired device .
• If no connection can be
made inside 2 minutes
pairing mode will begin .
‘BT’ flash slowly
• Pairing mode
Controlling a paired device
Once connected you can either use the controls on
the audio device to begin playback, skip tracks etc.
Or you can use the control buttons on the speaker
bar & remote.
1:
The
PLAY/PAUSE
button
(6 or 17)
when pressed will
begin playback of the selected track on the audio
device . Press again to pause playback .
2:
To skip to the next track press the
SKIP
button
(7
or 27)
.
3:
To skip to the previous track press the
SKIP
button
(7 or 20)
.
4:
Any further operations must be done from the audio
device .
NOTE: the volume output is effected by the
volume level on the audio source EG: Phone or
laptop, so make sure that is set to about 70-80% (
not too loud to avoid distortion).
Bluetooth notes
• The operation range of bluetooth is approximately 10
meters (30 Feet). Any obstacles in the path between
devices may reduce this range.
• Only one Bluetooth device can be paired at a time.
• Not all Bluetooth devices are compatible.