Bush CBAR7W Installation & User'S Instructions Download Page 10

Page 9

User instructions

Wall mounting the sound bar

1:

 Align the Sound bar in the 

chosen location . Use a 
pencil to mark the drilling 
positions 

750

mm apart .

NOTE: The Sound bar should be located at least 
7.5cm below the bottom of the TV.

3 inches (7.5 cm) or more

40”

2:

 Drill holes as marked in 

step 

1

 .

3:

 Insert 

2

 screws 

(not 

supplied)

 into the holes 

and tighten . Take care to 
leave 

5

mm between the 

screw heads and the wall .

NOTE: You will need to ensure the screws are long 
enough to sufficiently grip the wall while allowing 
5mm between screw head & wall.

4:

 Hook the Sound bar into the screws . For secure 

mounting ensure the screw heads slide firmly into the 
narrow part of the brackets .

Wall mounting advice

• In order to avoid damage to the equipment and 

personal injury you should get a qualified person to 
drill the fixing surface and fit the appropriate wall 
fixings.

• Take care not to allow the main unit to fall while 

attempting to hook onto the wall mount brackets.

• Before mounting, check the wall strength, if it is not 

clear then consult relevant qualified personnel.

• When drilling into walls, always check that there are no 

hidden wires or pipes etc.

• Make sure the screws & wall plugs are suitable for 

supporting the unit.

Summary of Contents for CBAR7W













Reviews: