BTS29TB BK8000L Stereo Pairing_AUX In_V1.0_20150605 _r0
9
Disable the stereo paring function on two speakers:
1.
In speakers power on mode, short press the “
(11)
and
(8)
”
buttons at the same time on one unit, tones are heard and stereo pair
data are erased on this unit.
2.
And then, short press the “
(11)
and
(8)
” buttons at the same
time on the other unit, tones are heard and stereo pair data are
erased on this unit too.
3.
And now, two speakers can be found and pairing by the mobile device
at the same time.
4.
Does the above mentioned methods of stereo pairing function on two
speakers if you want to activate this function again.
5.
Active again the stereo pairing functions on two speakers at any time
you want them to.
N.
Reset the device
In some circumstances the device’s function may hanging and need to
reset. To reset the Bluetooth speaker;
1.
Use a 0.8~1mm stick or similar object (like tooth stick), use dull side
and carefully insert it into the
“Reset Hole (2)”
until you feel to hit the
end. Actually that is the tact switch button surface;
2.
Then add a bit of force and you will get a click sound and feeling
return from switch. The device is reset and restart in seconds.
3.
Press and hold the “
(11)”
button to turn ON and restart the device
after reset is done.
O.
Trouble Shooting
Can’t turn ON
•
Check battery is it charged with enough energy.
•
Check whether the device is in power OFF mode.
No sound
•
Check whether volume level is in lower position on
your Bluetooth speaker and mobile device or
PC/Mac.
•
Make sure that your Bluetooth device is within the
effective operation range.
•
Check whether the Bluetooth device is paired.
•
Check whether the Bluetooth device show
connected.
•
Check if you have selected the correct audio
source.
No response from
speaker
•
Reset the speaker by press the built in reset switch.
