BTS29TB BK8000L Stereo Pairing_AUX In_V1.0_20150605 _r0
5
C.
About the rechargeable Battery & Charging
This Bluetooth Speaker has an internal, non–user-replaceable battery.
For best results, the first time you use this Bluetooth Speaker, let it charge
for about 4 ~ 5 hours or until the
“Charge LED (3)”
light to off from On
which show you the battery is fully charged.
For maintain the battery life and performance, if speaker isn’t used for
a while, the battery might need to be recharged. Charge the battery at
least once every month.
To recharge the rechargeable battery:
1.
Connect the Bluetooth Speaker’s “
Micro USB socket (4)”
with the
computer’s USB port through USB cable (supplied).
2.
The
“Charge LED (3)”
light will turn On in red, the battery is in
charging.
3.
The
“Charge LED (3)”
light will turn Off when the rechargeable
battery is fully charged.
4.
Disconnect the USB cable when it is done.
D.
Power ON and Pairing
1.
Press and hold the “
(11)”
button to turn ON the device, a series of
tones will sound and the
“Bluetooth LED (12)”
will light and then fast
blinking in seconds. The device is in paring mode.
2.
Then, activate the Bluetooth function in your Bluetooth device (such
as Mobile Phone or Personal Computer); the device will enter to
Bluetooth searching mode automatically, if not, tap the related
selection to manually enter to searching mode. (refer to your device’s
manual when necessary)
3.
Your Bluetooth device should show
“Denali S1002”
in list, and then
select it for pairing. Waiting for some seconds and you will see
connected message as shown on your mobile device. (For some
Bluetooth devices, you may need to input
“0000”
as pairing
password)
4.
If pairing is successful, a series of tones will sound and the
“Bluetooth
LED (12)”
light will switch to slow blinking light from fast.
5.
Now, you can start to music play from the mobile device by its music
player program.
6.
Press and hold the
“ (11)”
button to turn OFF the device when it
not in use.
Note:
for saving battery energy, the Bluetooth Speaker will turn to Off
mode automatically when no device is in paired in 8 minutes. Turn On the
device by Press and hold
“ (11)”
button to turn On the device if you
want.
E.
Disconnect from paired device
1.
To disconnect with paired device, for better result turn Off the
