Bush BSH60BFCHB, Instruction Manual

Page: 34 / 39

Product support
Help is always at hand
Product support 34
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
TROUBLESHOOTING&TRANSPORT
Troubleshooting
If you still have a problem with your appliance after checking these basic troubleshooting steps, please contact
an authorised service person or qualified technician.
Problem Possible Cause Solution
Hob burners do not work.
The burners may be in the ´off`
position.
Supply gas pressure may not be
correct.
Power (if the appliance has an electric
connection) is switched off.
Check the position of oven and/or grill
burner’s control knob.
Check the gas supply and gas
pressure.
Check whether there is power
supplied. Also check that other kitchen
appliances are working.
Hob burners do not light.
Burner cap and crown are not
assembled correctly.
Supply gas pressure may not be
correct.
LPG cylinder (if applicable) may be
depleted.
Power (if the appliance has an electric
connection) is switched off.
Ensure the burner parts have been
placed correctly.
Check the gas supply and gas
pressure.
LPG cylinder may need replacing.
Check whether there is power
supplied. Also check that other kitchen
appliances are working.
Flame colour is orange/yellow.
Burner cap and crown are not
assembled correctly.
Different gas compositions.
Ensure the burner parts have been
placed correctly.
Due to the design of the burner, the
flame can appear to be orange/yellow
in certain areas of the burner.
If you operate the appliance with
natural gas, city natural gas may have
different compositions. Do not operate
the appliance for a couple of hours.
Burner is not igniting or only
partially lighting.
Burner parts may not be clean or dry.
Ensure that parts of the appliance are
dry and clean.
Burner sounds noisy. -
This is normal. The noise may reduce
as they heat up.
Noise -
It is normal for some metal parts on
the cooker to produce noise when in
use.
Transport
If you need to transport the product, use the original product packaging and carry it using its original case. Follow
the transport signs on the packaging. Tape all independent parts to the product to prevent damaging the product
during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance, especially the external
surfaces of the product, is protected against external threats.