RADIO OPERATION
FM RADIO OPERATION
1. Enter FM Function
In the turn-on or play status, press the FM button on the remote control to enter FM mode.
2. Select stations
a) Directly input frequency: press the “-/--” button on the remote control, input frequency directly.
E.g.
c) Press or buttons to tune the frequency up or down on the step of 0.05 MHz.
Press and hold these buttons, the device will switch to search available stations from up or down
automatically. It stops tuning when it found a strong signal station.
3. Auto-Search
Press the SEARCH button to search stations from the low to high frequency automatically.
Meanwhile the searched stations are saved automatically. Press this button again to stop searching.
4. Save Stations
Press the SAVE button to save the frequency of band.
E.g. if you want to save 99.30MHz in 28th, please press “-/--” button, then press 2, 8 button to select
the preset station, then press “-/--” button and input 9, 9, 3, 0, at last press SAVE button to save
this frequency.
6. Soundtrack Selection
Press MO/ST button, you may select Stereo on or off in FM status. If the signal is not strong
enough, you can not select turn stereo on.
Remark: FM Frequency range : 87.5-108.0MHz
NOTE: You may adjust the best radio effect by adjusting the FM antenna.
1, to select 89.90, press “-/--” button, then press the number buttons 8, 8, 9, 0 and it enters
the FM 88.90MHz.
E.g. 2, to select 105.90, press “-/--” button, then press the number buttons 1, 5, 9, 0, and it will
enter the FM 105.90MHz.
b) Press the CH- or CH+ buttons to select the previous or next stations.
17
