- 11 -
ECO-Power/Standby mode features
Switching ON / OFF
When you fi rst connect the unit to the AC power, the unit will be in standby mode.
- Press
the button, the unit switches to the last selected source.
- Press
the button to switch the unit back to standby mode.
Switching the system to ECO Power/Standby mode
Long pressing the for 2 seconds or more to switch to ECO Power or standby mode.
ECO Power mode
The clock will not be displayed.
Press the
CLOCK
button to display the clock on the display lens.
Standby mode
The clock display on the display lens.
Note:
If the unit is idle for more than 15 minutes, it will automatically switch to ECO-Power mode.
Setting the clock
Setting the clock manually
1. In standby mode, long pressing the
CLOCK
button on the remote control for 2 seconds or
more to activate the clock setting mode. [24] or [12] hour format will blink.
2. Press the
VOL +/-
buttons on the remote control to set the 12/24 hour format.
3. Press the
CLOCK
button, hour indicator will blink.
4. Press the
VOL +/-
buttons on the remote control to set the hour.
5. Press the
CLOCK
button, minute indicator will blink.
6. Press the
VOL +/-
buttons on the remote control to set the minute.
7. Press the
CLOCK
button, the built-in clock starts operating.
Note:
• To exit clock setting mode without storing, press the
L
button.
• If no button is pressed in 90 seconds, the unit exits clock setting mode automatically.
• If a power failure occurs or the unit is disconnected from the mains, the clock setting will be
lost.
Automatically synchronzies clock time
In DAB/RDS station, the unit can synchronize with time transmitted by DAB/RDS station
automatically.
Manual synchronzies clock time
Tuned to a with CT information DAB/RDS station, long pressing the
CLOCK
button for 3
seconds, the system clock will synchronization with RDS clock.
