Bush BFSLNB9B, Instruction Manual

Page: 25 / 41

Using your D ishwasher
24
Test S trip
Using your Dishwasher
Getting the most from your appliance
B efore using your appliance
P reparing your D ishwasher for first use
C heck whether the electricity and supply water
specifications match the values indicated in the
installation instructions for the machine.
R emove all packaging materials inside the machine.
Set the water softener level.
Fill the rinse aid compartment.
F ill the salt (If Available)
To fill with softener salt, open the salt compartment
cap by turning it counter clockwise. (
1 ) ( 2 ) A t first use,
fill the compartment with 1 kg salt and water (
3
) until it
is almost overflowing. If available, using the funnel ( 4 )
provided will make filling easier. R eplace the cap and
close it. A fter every 20t h-3 0 th wash, add salt into your
machine until it fills up (approx. 1 kg).
Fill the salt compartment with water the first time you
fill the salt compartment only.
U se softener salt specifically produced for use in
dishwashers.
When you start your dishwasher, the salt compartment
is filled with water, therefore put the softener salt in
prior to starting your machine.
If the softener salt has overflowed and you do not start
the machine immediately, run a short washing
program to protect your machine against corrosion.
Run water
through tap
(1min.)
Keep the
strip in
water(1sec)
Shake
the strip.
Wai
t
(1min.)
Set the hardness
level of your
machine.
1
2
3
4
5
6
Level
German
dH
French
dF
British
dE
Indicator
1 0-5 0-9 0-6 L1 is shown on display.
2 6-11 10-20 7-14 L2 is shown on display.
3 12-17 21-30 15-21 L3 is shown on display.
4 18-22 31-40 22-28 L4 is shown on display.
5 23-34 41-60 29-42 L5 is shown on display.
6 35-50 61-90 43-63 L6 is shown on display.
NOT E : L evel is set 3 as default. If the water is
well water or has a hardness level above 90
dF, we recommend that you use filter and
refinement devices.
Wa ter H ardness Table
W ater S oftener S ystem
The dishwasher is e q uipped with a water softener
which reduces the hardness in the mains water
supply. To find out the hardness level of your tap
water, contact
your water company or use the
test strip (if available)
S etting
•
Turn the knob to the "Of f " position.
•
P ush the " Start /P ause " button and hold it
down.
•
Turn the knob clockwise one step.
•
H old down the " Start /P ause " button until the
LED's flash and "SL" disappears.
•
The machine will display the last setting.
•
Set the level by pushing the "+" and "-"
buttons.
•
Turn the knob to the "O ff " position to save
the setting.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 257 7271.
1
2
3
SAL
T
4