6
DAB/FM/Bluetooth clock radio
4. For additional settings in DAB radio mode, press and hold the <MENU / INFO>
button. Once an option is displayed, let go of the <MENU / INFO> button. Turn the
rotary dial to select any of the following choices and press the <SCROLL/SELECT>
dial to confirm.
To access these options your radio must be switched “ON”. If your radio is not ON,
press the Power button to switch it ON.
-
Full Scan:
Automatic channel search of all available channels.
You can use this function to refresh your channel list or to scan for new
available stations.
Press and hold the <MENU / INFO> button, release once an option is
available on the screen. Turn the rotary dial to select ‘Full scan’ and press
once to confirm. Your radio will start scanning now.
-
Manual tune:
Frequencies can be manually selected
As well as the normal method of scanning, you can also manually tune to a
particular channel/frequency. This can be useful for adjusting your antenna to
achieve the best possible reception and scanning a particular channel to update
the station list.
Press and hold the <MENU / INFO> button, release once an option is
available on the screen. Turn the rotary dial to select ‘Manual tune’ and press
once to confirm. Then turn the rotary dial again to select a particular
frequency option and press <SCROLL/SELECT> button to confirm.
-
DRC (Dynamic Range Control):
Adjust and change the dynamic range
This function reduces the difference between the loudest and quietest audio
being broadcast. Effectively, this makes quiet sounds comparatively louder
and loud sounds comparatively quieter.
Press and hold the <MENU / INFO> button, release once an option is
available on the screen. Turn the rotary dial to select ‘DRC’ and press once to
confirm. Then turn the rotary dial again to select <off (default) / high / low>
and press <SCROLL/SELECT> dial to confirm.
Note:
DRC only works if it is enabled by the broadcaster for a specific station.
DRC is embedded in the broadcast.
