Bush BCH90B, Instruction Manual, Page: 18 / 30

Using your Cooker Hood
Getting the most from your appliance
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 01759 487838
Using your Cooker Hood
18
USE AND MAINTENANCE
It is recommended to operate the appliance prior to cooking.
It is recommended to leave the appliance in operation for 15 minutes after
cooking is terminated in order to completely eliminate cooking vapors and
odours.
The proper function of the cooker hood is conditioned by the regularity of
the maintenance operations, in particular, the active carbon filter.
The anti-grease filters capture the grease particles suspended in the air,and
are therefore subject to clogging according to the frequency of the use of
the appliance.
In order to prevent fire hazard, it is recommendable to clean the filter at a
maximum of 2 months by carrying out the following instructions:
●
Remove the filters from the cooker hood and wash them in a solution
of water and neutral liquid detergent, leaving to soak.
●
Rinse thoroughly with warm water and leave to dry.
●
The filters may also be washed in the dishwasher.
Please take note that the aluminum panels may alter in color after several
washes.
The active carbon filters purify the air that is replaced in the environment.
The filters are not washable or reusable and must be replaced at maximum
every four months. The saturation of the active carbon filter depends on the
frequency of use of the appliance, also by the type of cooking and the
regularity of cleaning on the anti-grease filters. To remove the charcoal
filters place our hand on one filter at a time and turn it toward the front part.
The charcoal filter can now be removed. Always ensure to replace both
filters at the same time.
Clean the fan and other surfaces of the cooker hood regularly using a cloth
moistened with denatured alcohol or non abrasive liquid detergent.
The illumination installation is designed for use during cooking and not for
prolonged general illumination of the environment. Prolonged use of the
illumination installation notably reduces the duration of the bulb.
Use a one-edged screwdriver or any other appropriate tool to lift and
remove the overhead light fixture. Replace the damaged lamp. Use only
halogen lamps as the original specification, avoiding contact with hands.
Return the light fixture to its position (snap fastening).