
Installing your
Cooker Hood
Bringing it all together
Installation requirements
THIS COOKER
HOOD MUST BE INSTALLED
BY A COMPETENT PERSON TO LOCAL
REGULATIONS
Data Label
The Data Label is located on the rear of the
appliance. A duplicate Data Label is supplied to
adhere in an accessible area next to the appliance.
Unpacking
Carefully unpack and examine the appliance for
any damage. If you think there is a defect, do not
use the appliance and contact Product Support
on 01759 487838.
Packaging materials should be collected
together and disposed of immediately as they
may be harmful to children.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
12
Installing your Cooker
Hood
PLEASE NOTE: The cooker hood must be installed at a minimum of 65cm above the hob
Summary of Contents for BCH90B
