Bush BBISGLPYROBLK, Instruction Manual

Page: 15 / 36

Installing your electric cooker
Bringing it all together
Installing your Electrical Cooker
15
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
panel of the oven must be a minimum of 50 mm
and the distance between the worktop and the top
of control panel must be a minimum of 25 mm.
Worktop
Hob
min. 25 mm
min. 50
mm
Oven
1. The distance between the base of the hob and the
top panel of the oven must be a minimum of 10
mm for air circulation.
min. 10
mm
Electrical Connection and Safety
WARNING: The electrical connection of this
appliance should be carried out by an authorised
service person or qualified electrician, according to the
instructions in this guide and in compliance with the
current local regulations.
WARNING: THE APPLIANCE MUST BE EARTHED.
Before connecting the appliance to the power supply,
the voltage rating of the appliance (stamped on the
appliance identification plate) must be checked for
correspondence to the available mains supply voltage,
and the mains electric wiring should be capable of
handling the appliance’s power rating (also indicated
on the identification plate).
During installation, please ensure that isolated cables
are used. An incorrect connection could damage your
appliance. If the mains cable is damaged and needs
to be replaced this should be done by a qualified
personnel.
Do not use adaptors, multiple sockets and/or extension
leads.
The supply cord should be kept away from hot parts
of the appliance and must not be bent or compressed.
Otherwise the cord may be damaged, causing a short
circuit.
If the appliance is not connected to the mains with a
plug, a multi-pole isolator switch (with at least 3 mm
contact spacing) must be used in order to meet the
safety regulations.
The appliance is designed for a power supply of 220-
240V ~ and 380-415V 3N~. If your supply is different,
contact the authorised service person or a qualified
electrician.
The power cable (H05VV-F) must be long enough to
be connected to the appliance, even if the appliance
stands on the front of its cabinet.
Ensure all connections are adequately tightened.
Fix the supply cable in the cable clamp and then close
the cover.
The terminal box connection is placed on the terminal
box.
Brown
Green
Blue