
10
Customer Helpline
0845 600 4632
CAUTION
- Make sure the oven and hobs are
turned off prior to commencing any cleaning. Make
sure all parts have been allowed to cool to prevent
the risk of touching hot parts.
Interior cleaning
Do not
use steam cleaners when cleaning the
oven.
General cleaning of the interior surfaces may be
•
conducted using a wet cloth and soapy water.
Avoid using harsh abrasive cream and/or
•
powder based cleaners.
Use an approved oven cleaner periodically or if
•
the oven interior gets particularly dirty.
In order to prevent damage to your appliance
•
always test cleaners on small section fi rst and
follow the manufacturer’s instructions for use.
Exterior cleaning
Use a wet cloth and mild detergent on metallic
•
and enamelled surfaces.
Use a glass cleaner on the exterior surfaces of
•
glass windows and doors.
Always follow the cleaner manufacturer’s
•
instructions.
IMPORTANT!
– Do not use abrasive cleaners or
scouring pads as this may damage the enamel
surfaces and shorten the life of the appliance.
Cleaning and Maintenance
Customer Helpline
0845 600 4632
Cleaning and maintenance
Changing the Oven Light
Before replacing the bulb disconnect the
1.
appliance from the electricity supply.
Make sure that the oven has had suffi cient time
2.
to cool down before opening the oven door.
Remove the glass protective cover, as shown
3.
in fi gure 10, by twisting it anticlockwise, taking
care not to let it drop.
Remove the lamp by twisting it anticlockwise,
4.
taking care not to let it drop.
The replacement lamp
5.
must
conform to the
following rating:
25 Watt 230V, 50 Hz, E14 resistant to high
•
temperature (300°C)
Part number 32011563 - Oven Light 230V.
•
This bulb can be purchased from your
6.
authorised service agent.
Replace the lamp.
7.
Replace the glass protective cover.
8.
Check the light comes on when you use the
9.
oven.
Figure 10
glass protective cover