Customer Helpline
0845 600 4632
13
• Before switching on, place the appliance in
an upright position and wait at least three
hours without moving the appliance. This will
give the freezing circuit time to settle and
operate effi ciently.
• Clean the appliance thoroughly, especially
the interior, before use (see Cleaning and
Maintenance).
Warning:
Installation of the appliance and
electrical connections must be carried out
by a qualifi ed technician in accordance
with the installation manual and local
regulations.
• The procedure for installation the appliance
into the kitchen unit is given in the installation
section of this information booklet. This product
is only intended to be used in proper kitchen
units.
• The appliance must be connected with a
properly installed fused socket. Power supply
(AC) and voltage at the operating point must
comply with the details on the name plate of
the appliance (the name plate is located on the
inside-left of the appliance).
• Insert the plug into a socket with an effi cient
ground connection. If the socket has no
ground contact or the plug does not match, we
suggest you to call an authorised electrician for
assistance.
• The manufacturer is not responsible for
failure to complete the ground connection as
described in this booklet.
• There can be an odour when you fi rst switch
Recommendations
Thermostat setting
User Instructions
Alarm Light
Power Light
Compressor
Light
The freezer thermostat automatically regulates
the inside temperature of the compartments. By
rotating the knob from positions 1 to 5, colder
temperatures can be obtained. The “0” position
shows the thermostat is closed and no cooling
will be available.
Freezer Thermostat Setting;
0
: The appliance is switched off.
1-2
: For short-term storage of food in the freezer
compartment, set the knob between the
minimum and medium position.
3-4
: For long-term storage of food in the
freezer compartment, set knob to the
medium position.
5
: For freezing fresh food. The appliance will
run for colder temperatures.
SF
: The compressor will start to run continuously
with maximum performance. The freezer
temperature will decrease and the appliance
will switch to the lowest temperature. Place
the food to be frozen quickly inside the
freezer, preferably in the middle drawers.
Once the food is frozen, you must set the
thermostat knob to the desired position.
Note 1
: Observe that the orange lamp will light
when the compressor runs. Therefore, when SF
is active, the compressor will run continuously
and the lamp will light continuously.
Note 2
: The ambient temperature (temperature
of the freshly stored food and how often the
door is opened) affects the temperature in
the refrigerator and freezer compartments. If
required, change the temperature setting.
