Bush A147CR6B, Installation & User'S Instructions

Page: 14 / 20

Error Signals
Customer Helpline: 0845 600 4632
Your machine is equipped with systems which will take the necessary precautions and warn you in
case of any.
IMPORTANT: IT CAN TAKE UPTO 10 MINUTES FOR ERROR TO REGISTER.
FAILURE
CODE
PROBABLE FAILURE PROCESS TO BE FOLLOWED
E01
The door of your
machine is left open.
Close the machine door. If your machine persists to
indicate fault, turn off your machine, unplug it and
contact the nearest authorised service immediately.
E03
Pump is faulty or pump
filter is clogged or
electrical connection of
the pump is faulty.
Clean the pump filter.
If the problem persists, contact the nearest
authorised service. (*)
E04
Your machine has
excessive amount of
water.
Your machine will discharge water by itself. After the
discharging operation, turn off your machine and
unplug it. Turn off your faucet and contact the
nearest authorised service.
(*) See the section regarding the care and maintenance of your machine.
FAILURE
CODE
PROBABLE FAILURE PROCESS TO BE FOLLOWED
Water cut-off or low
mains water pressure.
- Water faucet may be closed. Check.
- Mains water may be cut-off.
Check.
- If so, switch the programme knob to position 0.
You can select a programme and run your machine
after the mains water is supplied.
- Mains water pressure may be low. Check.
- Water inlet hose may be twisted. Check.
- Water inlet hose may be clogged.
- Clean water inlet hose filters. (*)
- Valve inlet filter may be clogged.
- Clean the valve inlet filters. (*)
If the problem persists, unplug your machine, turn
off your faucet and contact the nearest authorised
service.
Pump is faulty or pump
filter is clogged or
electrical connection of
the pump is faulty.
- Pump filter may be clogged. Clean the pump
filter.(*)
- Discharging hose may be clogged or twisted.
Check the discharging hose.
If the problem persists, contact the nearest
authorised service. (*)
13