Bush A147CR6B, Installation & User'S Instructions

Page: 13 / 20

1. Loading
a:
Open the door, place laundry item by item
into the washing machine, firmly close the door.
b: Do not overload the washing machine (see the
program selection guide for maximum load
information, page 10).
2. Add detergent
Pull out the detergent drawer, add the detergent
and softener to the correct compartments.
3. Select a washing program
Adjust the program knob to a program you
desire.(Page 10)
4. Function buttons
Select the 'delay timer', ' temperature select' or
'easy ironing' settings as required
(see page 8-9).
5. Start washing
Press the start/pause button and the washing
machine will start.
6. Finish washing
a:
Your machine will automatically stop when the
program you have selected ends.
b: Expression of “END” will flash on the
electronic display.
c: Turn the program knob to O(off) position.
d:
The door will be unlocked approximately two
minutes after the program ends.
e: You can open the door by pulling the handle
of the door towards yourself and take out your
clothes.
f: After you unload your clothes leave the door
open to dry the interior of your machine and to
prevent mould from developing.
g:
Unplug your machine from the mains power
supply.
h: Close the water tap.
7. Changing a selected program
If you have selected a program and you do not
want it to continue:
a:
Press the start/pause button.
b: Bring the program knob to O(off) status.
c: Adjust the program knob to the program you
desire.
d: By pressing the start/pause button, run the
program that you have selected.
Note: If you want to change running program, O
position should be used. Bringing the program
knob to another position will not change running
program.
8. Cancellation of a program
If you wish to end a running program early:
a: Press the start/pause button.
b: Turn the program knob to O(off) status.
c: Your machine will stop the washing operation
and the programme will be cancelled.
d:
To get rid of the water accumulated in the
machine switch the programme knob to any
programme.
e: Your machine will perform the necessary
discharge operation and cancel the programme.
f: You can run your machine by selecting a new
programme.
Note:
If the power is interrupted at any stage of
the washing program, your machine will
continue the program from the point where it
was interrupted. Provided no changes have
been made to the program selected.
Child Lock
To avoid programme flow from being affected if
programme knobs are pressed or programme
knob is turned when performing washing
operation in your machine, child lock is
available. The child lock will become active after
the first and second function buttons on the
control panel are pressed at the same time and
for longer than 5 seconds.
When it becomes active the electronic display
will blink “CL” and child lock light will light up.
If any button is preesed while child lock is active,
the child lock light will blink on the electronic
display.
When any of the programmes are running and
child lock is active, if another programme is
selected after programme knob is switched to 0
position, the programme already running will
contiune.
To deactivate it, you will need to press on the
same buttons for more than 5 seconds. When
the child lock is deactivated, child lock light on
the electronic display will go off.
User Instructions
Customer Helpline: 0845 600 4632
Using your washing machine
12