Bush 762/6504, Instruction Manual

Page: 25 / 40

Audio out: Use this to select the audio coding used to listen to your DVD on your TV.
SPDIF / OFF: Turns off the SPDIF output.
SPDIF / RAW:
If you have connected your DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
SPDIF / PCM: Only if your receiver is not capable of decoding multi-channel audio.
HDMI Audio: Use this to select the HDMI Audio coding used to listen to your DVD on your
TV.
Choose between:
AUTO
or
PCM
.
Picture
Select the Preference menu using the t buttons on the remote control.
Brightness:
Use this to set the brightness of the DVD's image.
Press the ▼ button to select brightness on the sub menu. Use the button access the
slider. To increase the brightness press the ▲ button, or the ▼ button to decrease the
brightness.
When you have finished adjusting the setting, press the button to go back to the sub
menu.
Contrast: Use this to set the contrast of the DVD's image.
Press the ▼ button to select contrast on the sub menu. Use the button access the slider.
To increase the contrast press the ▲ button, or the ▼ button to decrease the contrast.
When you have finished adjusting the setting, press the button to go back to the sub
menu.
Hue: Use this to set the hue of the DVD's image.
Press the ▼ button to select hue on the sub menu. Use the button access the slider. To
increase the hue press the ▲ button, or the ▼ button to decrease the hue
When you have finished adjusting the setting, press the button to go back to the sub
menu.
Saturation: Use this to set the saturation of the DVD's image.
Press the ▼ button to select saturation on the sub menu. Use the button access the
slider. To increase the saturation press the ▲ button, or the ▼ button to decrease the
saturation.
When you have finished adjusting the setting press the button to go back to the sub menu.
Using your DVD PLAYER
Let’s get started
section of these instructions Or by calling one of our experts on
0345 604 0105
25









CONTRAST
HUE
SATURATION
SHARPNESS
BRIGHTNESS