Bush 55/148F, User Manual, Page: 26 / 37

Advanced features
Getting the most from your TV
Advanced features 36
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
4) 5) 6)
3)
2)
1)
Network confi guration
For the network configuration to work the TV will need to be connected to your home network via an Ethernet
cable, with these requirements in place the TV will connect to the network automatically.
If you are looking to change the configuration to a static IP address this can be done by following the instructions
below.
1) In the Setup Menu you will need to highlight and select Network Configuration.
2) When the Network menu appears highlight and select Wired Network.
3) Next the Wired Network menu will appear please highlight and select Configuration.
4) The Network Configuration menu allows you to choose between DHCP and Static.
DHCP - will automatically connect the TV to your home network (this is the default setting and is highly
recommended).
Static - is an advanced option and allows you to manually change the IP, Netmask, Gateway and DNS information.
5) If the static option is chosen you will able to scroll down and manually change the IP, Netmask, Gateway and
DNS information.
6) When the connection process is completed with either DHCP or Static option the Success screen will appear.
User Guide - BUS-MAN-0027 BUSH 55-148F.indd 36 User Guide - BUS-MAN-0027 BUSH 55-148F.indd 36 04/12/2015 15:16:43 04/12/2015 15:16:43